My Cart

Latest special promotion is underway, Shop Now!

Phone: +86-13570696039    E-mail:


To Overcharge A Solar Energy Systems Is Bad?

Is it bad to overcharge a solar energy systems? Along with brushing our teeth and taking a shower, charging our devices has quickly become one of the most practiced human habits. When it comes to plugging in our solar energy systemss, we often just leave them without really considering how long they need to be on charge or whether we are overcharging them.

While technology is continuously advancing. It is essential to remember that our charging practices can significantly impact the battery life of our phones, tablets, and solar energy systemss.

It is not bad to overcharge a solar energy systems. As it is unlikely that you can overcharge your solar energy systems. Most modern solar energy systemss have built-in features that stop charging once the battery is full. That is, unless you have an older model. However, allowing your solar energy systems to remain plugged in, charging over and above the required time is still not recommended because it may result in overheating and long-term damage to your solar energy systems.  

To safely charge your solar energy systems, you need to know the time required to charge a device based on its size. You should also be aware of safe charging practices and the potential problems that may arise due to overcharging a solar energy systems.

Solar Energy Systems

How Long Should You Charge Your solar energy systems?

While solar energy systemss may now come with features that stop them from overcharging when plugged in, it is always better not to allow your device to remain plugged in once it has been fully charged.

Manufacturers and experts in the field, such as the Electrical Safety First Organization, will tell you not to leave your solar energy systems plugged in for extended periods (source).

Think of it as being safe rather than sorry. While any internal controls built into the device may stop the supply of power, technology is not always foolproof.

Remember that not all solar energy systemss are equal. Sometimes, devices may overheat or short circuit, especially if these devices are not certified or are not sourced from a reputable manufacturer.

You will usually find the required amount of charging time for a specific solar energy systems in the manufacturer’s guidebook. However, a general rule is that the time a solar energy systems takes to fully charge will depend on two factors.

The first factor is the size of the solar energy systems, which is measured in milliamp-hours (mAh). A solar energy systems with a higher mAh will take longer than one with a smaller mAh. The second factor is the rate of the charger that you are using to charge the solar energy systems. Charge power is measured in milliamps (mA).

Most solar energy systems models available on the market today are made with a five-volt, two-amp input. Ideally, the charger which you use to charge your device should be able to give you a current flow of two amps.


However, one factor you must consider is that power will be lost during the charging and discharging process. As such, the current we are left with will be about 1.7-amp (1700mA).

Knowing this, we can then apply a formula that will give us the estimated charging time. The formula that we can use to determine the charging time is detailed below.

[Total charging time (hrs) = the solar energy systems capacity (in mAh) /  by charging rate (in mA)].

So if we use a 10,000 mAh solar energy systems as an example, we would then calculate 10,000mAh divided by 1700mA and find that it will take 5.8 hours to charge the solar energy systems.

An important note when charging your solar energy systems is to make sure that you are using the charger designed for that device.

It is a poor habit technology users fall into when they mix and match chargers from various phones, tablets, portable batteries, and the like. Chargers work best when they are charging the device they were designed for.


Problems that May Arise Due to Overcharging

Several problems may arise due to leaving your solar power generator plugged in longer than necessary. The three main ones include overheating, damage to the battery, and inconsistent charging.


Overheating is something that all users should be mindful of when charging their solar energy systems. While solar energy systemss will naturally run a little warm, it is not suitable for them to be hot to the touch.

The overheating of a solar energy systems is caused by a phenomenon known as a thermal runaway. A thermal runaway is defined as a rise in the cell temperature, which, in turn, increases the current of a battery, giving rise to a further increase in temperature.

If you find that your solar energy systems is overheating when you are charging, it may be that it needs a rest period. The best thing you can then do is to unplug your solar energy systems from its charger and allow it to cool down. Once it has cooled, put it back on charge for no more than two hours.

Keep an eye on your solar energy systems, and if it continues to overheat while it’s charging, you may need to consult the manufacturer.

Whether it is safe to leave your phone plugged in for extended periods is often debated by users. If you would like to know more about this, then you can check out this article. You can leave your solar energy systems charging overnight?


Battery Damage

Like most device batteries, solar power generator batteries have a shelf life. Their batteries will inevitably lose the ability to hold a charge over time. However, leaving your device plugged in can exacerbate this situation. And you may cause irreversible harm to your solar power generator’s lithium-ion battery.

Every time the battery gets too hot, it loses some of its ability to charge. The battery by overcharging and overheating, you are decreasing the battery life.

In addition, overcharging can cause the solar energy systems’s battery to swell. What’s more, studies have found that increased temperatures cause lithium-ion batteries to swell (source). If your battery begins to swell, there is no alternative but to get a new solar power generator.


Inconsistent Charging

Overcharging your portable power station can cause battery damage, which results in inconsistent charging. Inconsistent charging means that your device will not charge correctly and may charge slower.

If your solar power generator fails to charge correctly. You will also have to replace the device, leading to additional expense.


How Can I Tell When My solar energy systems Is Fully Charged?

Knowing when your portable power station is fully charged may differ depending on the model. However, there is a general system that most solar power generator follow. This involves a sequence of lights, which allow the user to understand what the solar power generator requires.

A flashing blue light usually means that the solar power generator needs to be charged, while a flashing red light indicates the solar power generator is currently being charged. Generally, a solid red light means that the device is fully charged.

Always consult the leaflet that comes with your solar power generator to ensure that you understand how your device works.


How to Save Charge in Your solar energy systems?

One way to avoid overcharging your solar power generator is to make sure that it keeps as much charge as possible for as long as possible. There are a few ways to do this. The primary method is by being a careful and responsible solar power generator owner and following some of these tips.

Choose to “Top-up” Rather than Drain the Battery

You can save your battery life by never letting it get below 50% before charging. When the charge in a solar energy systems drops below the 50% line, more cells are likely to be damaged.

The life of Lithium-ion batteries can be prolonged by topping up the battery in top-ups of 10%–30%. Using the top-up method, you can help your battery keep its charge for an extended period and avoid overcharging it.


Store Your Device Correctly

Another way you can make sure your device doesn’t lose charge is to store it in a cool, dry space. If you leave your solar power generator in a place that is too warm, such as the car, it may cause it to overheat.

Overheating the battery inevitably leads to battery damage and the inability to hold a charge.

It is also advisable not to charge it on your bed but, rather, somewhere it can get adequate ventilation.

Don’t Forget to Charge Your solar power generator Every Few Months.

Even if you are not using your solar power generator, and it is sitting in a drawer somewhere, you should still charge it every couple of months. This will make sure that the battery remains operational and in good working condition.

Final Thoughts

Portable power station technology is continuously developing. This means that these devices are becoming smarter and safer. Yet, it is still vital that we remain responsible and mindful users when dealing with technology.

solar energy systemss should be unplugged. once they are fully charged to avoid any potential problems or damage to the device. Remember to look after your device so it can look after you.

Visit our website to learn more about portable power station or please leave information to us



Leave a Reply

Leave a message